Computer and Cell tricks

Saturday, April 10, 2010

Tips to get free VODAPHONE gprs connections

Tips to get free VODAPHONE gprs connections

I've been asked by many Vodafone Users to post a Method to get a free GPRS for the Vodafone. Nobody wants to pay for what he/she uses. I am also a Nobody so I was also in trying out all the things to get free GPRS for Vodafone users since I am also a Vodafone User. Finally I have got a Full proof way to get free GPRS for all the Vodafone Users. This method has been tested on different mobiles and has been confirmed to be working. Still if anybody faces any problem please contact me and I will try to solve it as quickly as possible.
Followng are the Settings you require to configure on your Mobile:

Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Password: (no need)

Access Point Settings:
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data

Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
*IF that happen this settings is not working then change the proxy port number to:-
Proxy Port: 9401

FREE GPRS: Airtel Mobile Hack using simple techniques

FREE GPRS: Airtel Mobile Hack using simple techniques

A little hack found on the forums on about how to access the net from a pc using a mobile with Airtel prepaid card. Enjoy!
Raw Materials: PC/Laptop and necessary connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle to connect the mobile to the computer.

1) Activate Airtel Live! ( It’s FREE so no probs)

2)Create TWO Airtel GPRS data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows
Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2#
Username and Password : blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal.

10) Thank the one who gave you this hack!

Tested and working,

leave your comments so that I can know if it works

Send Unlimited Free SMS with Airtel Connection in india

Send Unlimited Free SMS with Airtel Connection in india

This is particularly for all the airtel india users. By using this trick you can send unlimited free sms throughout India free of cost by using your airtel connection. There is nothing better than getting messages free of cost and that too throughout the country, no charge for the STD messages also. To start using this trick you just need to configure your airtel phone a little bit, the procedure to which is given below.

Procedure to get started given below

1. The first thing you need to do is create a new service message centre which can be easily done by accessing the message settings option.

2. Now select a name for your connection and the foremost thing is to use the number +919810051905 in the message center number field.

3. Once you are done with this you should set the preferred connection as the packet data. To this you need to go into the phone settings and look in the connections menu for the option of preferred connection.

4. The next step is to change the access point. Access point settings can be accessed from the internet message options and it should be changed to airtel live.

5. After doing this you are all set to use the trick but just remember one thing, you need to add a 0 before each number you want to send message.

This trick may turn out to be really good but as a matter of fact I have not tried this trick yet. So all those who are going to try this, leave back your comments for the ones who will be trying

LG CU-320 Unlock Code Entry Instructions

Unlok Instructions :
1. Power on the Handset.
2. In Idle screen, input the special code "277634#*#".
3. Access the submenu "SIM Test" in Phone Test Mode.
4. Input the special code "2945#*#".
5. Access the submenu "SIM Unlock" which is just activated after the special code
6. Input the 8-digit Unlock code in the "Enter unlock code" input screen.
7. It will be unlocked.

Motorola CDMA Service Codes

NOTE : Motorola unlock codes are diffrent from this motorola service codes.

StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO

V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)

Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key

Motorola Phones (ALL)

1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again – programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

Motorola Unlock Code Instructions

How to Enter Unlock Codes For ANY Motorola Cellphone
How to enter your unlock code: Remove your working simcard and insert the simcard of a different provider, and when prompted for a subsidy password, enter the code above.

What to do if - "Contact Service Provider", "Tampert Alter", "Wait before enter special Code" message is displayed: If after inserting a simcard from a different provider you notice the message "contact service provider" or any of the messages above, you will need to leave your phone on, at that "contact service provider" screen, for 1-3 hours. Just let it sit on the screen and dont touch any buttons during that time. It will then switch to something like "enter subsidy password", and you can then enter your code.

Model : Motorola L6i & L7i (not L6 and L7 without "i")
1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.

How to "kill" a program which is not responding?

In this post you will come to know How to "kill" a program which is not responding?

When a program is not responding everybody gets angry.
But how to instantly close it without getting errors or even restart the pc?
Here it is:
1.ctrl+alt+del
2.click on the program that is not responding
3.hold ctrl and press "end task"

That is all.The program will close in less than 10 seconds and you will be happy again.

Note: In vista you don't need to hold ctrl

Nexus 5 - Free One-Column Professional Blogger Template

Nexus 5 is a free one column professional blogger template designed by BloggerBuster.

Features
Integrated Navigation Menu
Integrated "Featured Posts" section
Hover Effect on Summarized Posts
Stylized "Social" Section
Ultra customizable!
and more..!

Demo | Download

Adding Your Name Beside Taskbar Clock

Probably most of you have seen this trick before.But i think it's really nice.
I'm telling about adding your name beside taskbar clock.

Here is the trick (For windows XP):-1. Click on Start menu. Then on Control panel.
2. Now click on “Regional and Language Options” icon.
3. In the “Regional Options” tab, click on “Customize” button.
4. After clicking “Customize” button, another window pops up. Now click on the “Time” tab.
5. Besides AM Symbol and PM Symbol, you can add anything that you want to display in the system tray.
6. If there is limitation of characters, you can even delete the AM and/or PM symbol. Apply, OK. Done.. Look at your task barLimitation of this trick:
You might have already observed that, you can not insert more than 12 characters(after deleting the AM and PM symbol).
To over come this limitation, we shall enter into registry.(Tested in Windows XP)
1. Click on Start button.2. Click on Run.3. Type regedit. Click Ok.4. Now click the plus mark besides each of these -> HKEY_CURRENT_USER and then Control Panel and then International.

5. Now click on International. And find these s1159 and s2359. Right click and select “Modify Binary Data“, as shown in the above figure.
6. Now follow the above figure and modify the name.
Do not change the numbers. Just modify the text in the right most side. See to that, there is a period (DOT) after each character and 3 dots to specify/display a DOT in the system tray.

Enjoy!!!!!!!!!!!!!

Friday, April 9, 2010

Submit a Complete Sitemap of your Blogger Blog to Google for Better Indexing

Sitemaps, in simple English, are text files (see example) containing a list of all web pages that exist on your site. It is important that you create a comprehensive sitemap as it will help Google and other search engines crawl your site better and that might mean more traffic coming your way in the long run.

The Problem with Blogger Sitemap Files

Ideally, the sitemap file should contain all URLs of a site but if your blog is hosted on blogspot.com (or if you are using a self-hosted version of Blogger with a custom domain), you’ll be surprised to know that the default sitemap file (see example) contains only the 26 most recent pages of your blog.

That’s a bad thing because some of your older blog pages, that are missing from the system-generated sitemap file, may never get indexed in search engines. There’s however a simple solution to fix this problem.

Generate a Complete Sitemap for your Blogger Blog

Step 1: If you haven’t done this already, sign-in to your Google Webmasters account and add your blog. For details, check this video tutorial on how to add a blog to Google.

Step 2: Once your blog is added to Google, open the Sitemap Generator and type the full address of your blogspot blog (or your self-hosted Blogger blog).

submit sitemaps

Step 3: What you get is list of sitemap files that contain each and every page of your blog. You now just have to ping Google, Yahoo and Bing to inform them about these XML sitemaps.

As shown in the video screencast below, you need to manually add each of the sitemap files into your Google Webmaster Tools dashboard but for Bing or Yahoo, you can simply click blue hyperlinks and these search engines will automatically download the relevant sitemap files from your blogspot site.

Once all the Sitemaps are added, your Google Dashboard should look something like this.

sitemap added to google

If you see a red cross or an orange exclamation symbol instead of the green tick, that means something is wrong with your XML sitemap. Verify that the file exists by typing the sitemap URL in your browser.

Sometimes media enclosures (like MP3 files) in blog posts can create warnings during sitemap submission. And if you have switched from Blogger to WordPress, it still makes sense to submit sitemaps of your old Blogspot blog as that will only help search engines discover your new WordPress pages. Good luck.